About this item
- Electric reclining chair motor touch controller
- Function: 4 touch controllers for 2 motors, 5 pins, input voltage: 24V-29V
- Includes: Touch Button Model-500446 and Control Box Model-HC227
- Application: As a replacement for KD Kaidi touch sensor KDH-020
- Compatible: Compatible with most Reclienr brands such as Limoss, Okin, Kaidi.This hand controller don't compatible for recliners with a control box.
- Service: 12 months warranty service, 24*7 email support, we will do our best to solve product problems for you!
Product Description What You Get:Control box x 1Touch controller x 4Mounting screws x 2 Sensor-High-quality touch sensor and control box kit/1 power supply box 4 sensors 5-pin/Connectors and cables Used for-electric chair/ Recliner parts on limoss Reminding: 1. When installing this control components, you must confirm the applicable power supply model, and check the line connection according to our connection diagram, otherwise it may cause damage to some parts due to improper connection. 2. When the product fails, please contact our after-sales service for your rights, and do not disassemble it for repair without authorization. 3. When not in use for a long time, please disconnect the main power supply. Size Name:4 Touch Sensors Rated voltage: 29V Rated current: 1.8A Connector: 5-pin Length:about 243cm Operation guide 1. Turn on the motor Touch the button to open the motor (A or 1), the motor keeps extending until it stops at the farthest point. During the touch, if the touch is stopped, the motor will also stop extending. 2. Take back the motor Touch the button to retract the motor (B 或 2), and the motor will continue to retract until it stops at the farthest point. During the touch, if the touch is stopped, the motor will also stop the retracting action. Note: The above operation guide is applicable to the clockwise running of the motor. When the motor counterclockwise running, Button (B or 2) is turned on, button (A or 1) is retracted Installation Tips: 1. The leather hole is 6mm, and the product is inserted into the leather hole. 2. Install the gasket anti-loosing glue and tighten the terminal wire screws. 4 Touch Sensor and Control Box Kit /Recliner Sofa-repair parts 2 Touch Sensor and Control Box Kit/Recliner Sofa-repair parts Electric Recliner Chair Transformer 29V 2A -AC/DC for OKin-Limoss-La z Boy-Fama Electric Recliner Chair Adaptor 29V 2A -AC/DC Transformer power supply Recliner battery pack/Wireless mobile power adapter Recliner/Two separate lines/1-2 branch/cable/extension cord/Y splitter-cable Working current Rated voltage: 29V Rated current: 1.8A Rated voltage: 29V Rated current: 1.8A Input: AC 100-240V ; Output: DC 29V 2A Input-AC/100-240V, Output-DC/29V 2A input: 24V-35VDC/1.8A. Output: 25.2V 2.5A, 63Wh Current distributor cable
Reviews
There are no reviews yet.