Product Description Please check whether the mount fits your screen before purchasing. This bracket supports the following VESA screw hole spacing: (A) Horizontal / Horizontal: 75 mm, 100 mm (B) Vertical / Vertical: 75 mm, 100 mm Only if your device has the supported VESA hole spacing, the mount fits the screen. Important note: All diagonals in the item description/description/product packaging are approximate. For choosing the screen mount, not the screen diagonal is crucial, but the VESA standard (hole spacing on the TV). This mount is also suitable for screens whose diagonal is smaller or larger than stated in the product description. All you need to do is ensure that the VESA hole spacing is within the area supported by the bracket and the max. load weight of the bracket is not exceeded. CHECKLIST Measure VESA holes Measure hole spacing / VESA A: max. 100 mm B: max. 100 mm Supported VESA standards (in mm): 75x75 | 100x100 Measure screen Measure screen width and height C: min. 150 mm ​D: min. 150 mm Maximum load: Minimum Approx. 2 kg - max. 7 kg (gas lift mechanism requires a minimum weight) Product dimensions: For the dimensions of the holder, please refer to the product sketch and/or the item description. This is just a sample image, the design of the bracket may vary. Cable connection check Please note the cable routing. The mounting plate must not cover the ports on the back of your screen. Functions: Tilting The mount tilts +/-45°, so that the optimal viewing angle can be adjusted. Swivel The holder can be freely swivelled up to +/-90° left or right. This allows you to achieve multiple viewing angles. Flexible Thanks to the possibilities of swivelling the wall mount, tilt to rotate the front plate 360° and change the height of the monitor too freely, the mount is fully movable. cable management A cable management system is located on the swivel arm. This conducts your cables safely and space-saving from the TV to the wall. Box contents: In the package for you: A lot of dowels, screws and accessories. * TV is not included. Mount Mounting accessories TV screws (in various lengths) Installation instructions: Mounting made easy! Easy installation in just a few steps The graphically illustrated and described instructions in German show the function settings of the holder. Take a look at these in advance on our website. Brief description for installation: First mount the bracket on the wall. Now hang the screen in the front panel (help of a second person recommended). Now make the weight balance on the gas lift. RICOO S4411 Screen Wall Mount Fully Movable with Gas Lift VESA standards 75x75mm, 100x100mm Screen diagonal from...to Approx. 43 - 69 cm (17 - 27 inches) Maximum load capacity 2 kg - 7 kg (gas lift mechanism requires a minimum weight) Swivel range 180° (90° on each side) Tilt Range +/-45° Front plate rotation 360° Wall clearance Minimum 95 - max. 413 mm Special features: Fully movable, with gas lift