Product Description Please check whether the mount fits your screen before purchasing. This bracket supports the following VESA screw hole spacing: (A) Horizontal / horizontal: min. 50 mm - max. 470 mm (B) Vertical / vertical: min. 86.5 mm - max. 405 mm Only if your device has the supported VESA hole spacing, the mount fits the screen. Important note: All diagonals in the item description/description/product packaging are approximate. For choosing the screen mount, not the screen diagonal is crucial, but the VESA standard (hole spacing on the TV). This mount is also suitable for screens whose diagonal is smaller or larger than stated in the product description. All you need to do is ensure that the VESA hole spacing is within the area supported by the bracket and the max. load weight of the bracket is not exceeded. Checklist & Features Measure VESA holes Measure hole spacing / VESA A: max. 400 mm B: max. 400 mm Supported VESA standards (in mm): 200x200 | 300x200 | 200x300 | 300x300 | 400x300 | 300x400 | 400x400 Measure screen Measure screen width and height C: min. 500 mm ​D: min. 500 mm Maximum load: Approx. 35 kg Product dimensions: For the dimensions of the holder, please refer to the product sketch and/or the item description. This is just a sample image, the design of the bracket may vary. Cable connection check Please note the cable routing. The mounting plate must not cover the ports on the back of your screen. Features: Wall clearance Space-saving wall mount with a low profile depth of only 34 mm. Your flat screen TV sits discreetly close to the wall. Sturdy Wall bracket made of steel with double powder coating up to 35 kg load. The high-quality material provides a secure hold. Box contents: In the package for you: A lot of dowels, screws and accessories. * TV is not included. Bracket (pre-assembled) COMPLETE MOUNTING ACCESSORIES: Expansion dowels, washers Includes Screw set: TV screws (in various lengths) Assembly instructions (Engl Mounting made easy! Easy to assemble in just a few steps The graphically illustrated and described instructions in German show the function settings of the holder. Take a look at these in advance on our website. Brief description for installation: First mount the wall plate in a suitable place on the wall Then screw the recording rails to the back of your screen With these rails, you can now anchor your screen in the holder Finally, pull the loop of the fixing cord RICOO TV Wall Mount Flat F2044 RICOO TV Wall Mount Flat F0244 RICOO TV Wall Mount Tiltable N1944 RICOO TV Wall Mount Tiltable N1964 VESA standards Minimum 200 x 200 mm - max. 400 x 400 mm Minimum 200 x 200 mm - max. 400 x 400 mm Minimum 200 x 200 mm - max. 400 x 400 mm Minimum 300 x 200 mm - max. 600 x 400 mm Screen diagonal from...to Approx. 81 cm - 140 cm (32 inches - 55 inches) Approx. 66 cm - 127 cm (26 inches - 50 inches) Approx. 66 cm - 127 cm (26 inches - 50 inches) Approx. 77 cm - 178 cm (30 inches - 70 inches) Maximum load capacity 35 kg 60 kg 75 kg 95 kg Swivel range not present not present not present not present Tilt Range not present not present +/-12° +/-12° Front plate rotation not present not present not present not present Wall clearance 34 mm 25 mm 40 mm 40 mm Special features: Ultra slim (very flat), with mini spirit level Ultra slim (very flat), with mini spirit level Extra slim (flat), with mini spirit level, robust Extra slim (flat), with mini spirit level, robust Wall plate dimensions (W x H) 49.8 cm x 15 cm 43 cm x 14.7 cm 44 cm x 18 cm 64 cm x 18 cm Other features: Material: Steel. Net weight: 1.4 kg Material: Steel. Net weight: 1.2 kg Material: Steel. Net weight: 1.6 kg Material: Steel. Net weight: 1.9 kg