From the manufacturer Your safety is our priority... Nothing should interrupt your first thing. So every Triton accessory is tested to make sure it’s safe, hard wearing and optimised for performance. Triton Showers- Safety Critical Your choice of Shower Accessory is critical to the performance of your shower and you can rest assured that when you order a genuine Triton accessory that it has been tested to provide a great first thing day after day whether you are in Land's End or Fort William. Using non-Triton accessories may invalidate your parts and labour should you encounter a problem with your Triton shower. Triton Shower Head 5 Spray Head The five spray pattern shower head is a powerful and easy to fit shower head suitable for all showers. The elegant and simple design makes it a beautiful replacement for your current shower head. Shower Head Features Universal usage- suitable for all Five Spray Patterns Rub clean nozzle is easy to clean and maintain Critical to shower performance- tested and optimised for safe performance with Triton Showers One year part and labour- covered by Triton Gravity fed hot water system This system has a cold water tank in the loft or in the top of the airing cupboard and a hot water cylinder below it. The water in the cylinder is heated by a boiler or an electric immersion heater and fed to taps via a pipe from the top of the cylinder. As the hot water in the cylinder is used up, it is replaced with cold water from the tank above, which in turn is refilled from the mains water supply via a float operated valve. System water pressure is usually low. To give a higher pressure and flow rate from a mixer shower a booster pump can be installed. Gravity fed hot water system with Booster Pump This system has a cold water tank in the loft or in the top of the airing cupboard and a hot water cylinder below it. The water in the cylinder is heated by a boiler or an electric immersion heater and fed to taps via a pipe from the top of the cylinder. As the hot water in the cylinder is used up, it is replaced with cold water from the tank above, which in turn is refilled from the mains water supply via a float operated valve. System water pressure is increased due to the addition of a Booster Pump. Unvented System An unvented system has a hot water cylinder that is connected directly to the mains cold water supply and there is no need for a cold water tank in the home. The water is heated by a boiler or an electric immersion heater. As everything is under the pressure of mains water, the flow rates from taps and showers are much better and a pump is not needed to get a powerful shower. An unvented cylinder can be installed virtually anywhere e.g. in an airing cupboard or garage. Combination Boiler A combi - boiler can be located anywhere within the home. More often wall mounted but some are floor mounted. It heats water ‘on demand’ when a hot tap or mixer shower is turned on. Connected directly to the mains cold water supply at high pressure there is no need for a hot water cylinder, cold water tank or shower pump in the home