Product Description CLEAN SHAVE EVERYTIME No more cleaning out the sink after every shave. Shaving in the shower let’s you focus on your shave without making a mess. The humidity in a hot shower also opens up your pores for a closer shave. ANTI-FOG COATING Each Shower Mirror is coated in an anti-fog film. The film prevents hot water vapor sticking to the mirror’s surface and causing it to fog up. Even if one mirror is foggy, this one will not! HANDY RAZOR HOOK A handy razor hook is built in to the front of the mirror for easy reach and storage. This helps the razor dry and maintain its sharpness for longer. BEST USED WITH: GLASS On a window or shower glass pane. If placing on window make sure it’s not in direct sun. MIRRORS Any mirror large or small. Place on the side so it’s more discrete. STONE Marble and Quartz are ideal, the smoother the stone the better. TILES Tile must be larger than suction cup in order for mirror to stick. HOW TO INSTALL: STEP 1: CLEAN SURFACE Make sure to thoroughly clean surface to remove any dirt. After cleaning, dry the surface with a dry towel. See above for recommended surfaces (the smoother the surface the better the suction cup will stick). STEP 2: PUT IN PLACE Lightly wet the bottom of the suction cup to create a good seal. Make sure the suction is set to the unlocked position. Then, put it in the desired location. The suction cup might not stick right away so keep constant pressure on it until the next step. STEP 3: LOCK SUCTION CUP While applying pressure, lock the suction cup in place by rotating the white ring around the base clockwise. It will click once the suction cup locks closed. If the mirror does not stick then try again carefully cleaning the surface and applying more pressure when locking. REMOVING Removal is even simpler. Simply untwist the lock by rotating the white ring counter-clockwise. The suction cup should fall off by itself. However, if it doesn’t, then simply pull it off by pulling on the small tab on the top.